Product ID:PUTTY HARDENER 0200, 10110
MSDS Date:02/13/1995
FSC:8030
NIIN:01-413-5871
Kit Part:Y
MSDS Number: CCBJP

I T W DEVCON INDUSTRIAL CORP

30 ENDICOTT ST
DANVERS, MA 01923
US

Emergency Phone: 800-424-9300(CHEMTREC)

Info Phone: 508-777-1100

Cage: JO305

I T W DEVCON INDUSTRIAL CORP

DANVERS, MA 01923 US

Telephone: 508-777-1100

Cage: JO305

(ORAL,RAT) 2500 MG/KG.

CAS: 112-24-3

RTECS: YE6650000

Fraction By Weight: 30-40%

OSHA PEL N/K

ACGIH TLV: N/K

POLYAMIDE; (POLYAMIDE OF C18 FATTY -ACID DIMERS & TETA)

CAS: 68082-29-1

Fraction By Weight: 40-60%

OSHA PEL N/K

ACGIH TLV: N/K

PHENOL, NONYL-; (NONYL PHENOL)

CAS: 25154-52-3

RTECS: SM5600000

Fraction By Weight: 5-15%

OSHA PEL N/K

ACGIH TLV: N/K

PIPERAZINE, 1-(2-AMINOETHYL)-; (N-AMINOETHYLPIPERAZINE).

CAS: 140-31-8

RTECS: TK8050000

Fraction By Weight: 1-10%

OSHA PEL N/K

ACGIH TLV: N/K

LD50 LC50 Mixture:SEE INGREDIENTS
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: EYE: SEVERE IRRITANT. SKIN:
MODERATE IRRITANT. INHAL: IRRITATION OF NOSE & THROAT; NAUSEA &
VOMITING IN SEVERE CASES. INGEST: MAY CAUSE IRRITATION OF MOUTH AND
THROAT AND GASTROINTESTINAL TRACT . CHRONIC: RPTD SKIN CONTACT OR
INHALATION OF FUMES CAN CAUSE SENSITIZATION W/ITCHING, RASHES,
SWELLING(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: OF SKIN OR AN ASTHMA-LIKE RESPIRATORY
REACTION ON LATER EXPOSURE TO THE PRODUCT. PRLNGD/RPTD OVEREXP TO
MATL IF SENSIT & ALLERGIC RESPONSE. THOSE SO AFFECTED SHOULD
CONSULT MD & AVOID FURTHE R EXPOSURE TO MATL IF SENSITIZATION IS
CONFIRMED.
Medical Cond Aggravated by Exposure:ASTHMA, BRONCHITIS, OR SKIN
IRRITATIONS.

First Aid:EYE: IMMED FLUSH W/CLEAN WATER FOR AT LEAST 15 MINS WHILE
GENTLY HOLDING EYELIDS OPEN. GET MED HELP AS SOON AS POSS. SKIN:
IMMED REMOVE CONTAMD CLTHG & SHOES & WASH WELL W/SOAP & WATER. SEEK
MD IF IRR IT DEVELOPS. INHAL: REMOVE PATIENT TO FRESH AIR. GIVE
O*2/ARTF RESP IF NEEDED. SEE MD IF SYMPS PERSIST. INGEST: DO NOT
INDUCE VOMITING. DILUTE W/LOTS OF MILK OR WATER & GET IMMED MED
HELP.

Flash Point Method:TCC
Flash Point:>200F,>93C
Extinguishing Media:WATER, CO*2, DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT.
Unusual Fire/Explosion Hazard:NONE.

Spill Release Procedures:PVNT SKIN & EYE CONTACT; REMOVE CONTAMD CLTHG
& SHOES. ABSORB SPILL ON INERT MATL SUCH AS VERMICULITE, SCRAPE UP
& TRANSFER TO IMPERVIOUS CNTNRS. SCRUB SPILL AREA WITH STRONG
DETERGENT AND WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE WELL-CLSD IN COOL, DRY PLACE.
Other Precautions:IF PROD IS SANDED/MACHINED AFTER CURING, TAKE APPROP
PRECS AGAINST INHAL OF NUISANCE PARTICULATES. A TLV-TWA OF 10 MG/M3
SHOULD BE OBSERVED. PROD HAS BEEN TESTED FOR CORR I/A/W DOT REGS &
IS NOT CORR. ALL CHEMS IN PROD ARE ON CANADIAN DSL.

Respiratory Protection:NONE NEEDED IN NORMAL USE WITH PROPER
VENTILATION, IN POORLY VENTILATED AREAS USE NIOSH/MSHA APPROVED
ORGANIC VAPOR RESPIRATOR.
Ventilation:GENERAL MECHANICAL VENTILATION IS ADEQUATE FOR OCCASIONAL
USE. FOR PRLNGD/RPTD USE, LOCAL EXHAUST RECOMMENDED.
Protective Gloves:CHEM RESIST RUBBER(NEOPRENE) GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGS.
Other Protective Equipment:EMERGENCY EYEWASH & DELUGE SHOWER MEETING
ANSI DESIGN CRITERIA.
Work Hygienic Practices:REMOVE CONTAMD CLTHG & LAUNDER THORO BEFORE
USING. CONTAMD LEATHER ARTICLES(SHOES, BELTS) CANNOT BE DECONTAMD
&(SUPDAT)
Supplemental Safety and Health
HYGIENE PRAC: SHOULD BE DESTROYED.

HCC:B3
Boiling Pt:B.P. Text:>450F,>232C
Vapor Pres:<0.01 @ 68
Vapor Density:>1
Spec Gravity:0.98
pH:10-11
Evaporation Rate & Reference:<<1 (BUAC=1)
Solubility in Water:30-60%
Appearance and Odor:WHITE PASTE W/MILD AMMONIA-LIKE ODOR.

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS, ACIDS AND CHLORINATED ORGANIC COMPOUNDS.
Stability Condition to Avoid:EXTREME HEAT OR OPEN FLAME.
Hazardous Decomposition Products:ACRID AND TOXIC FUMES W/ORGANIC
AMINES, AMMONIA, OXIDES OF CARBON AND NITROGEN.
Conditions to Avoid Polymerization:HEAT IS RELEASED WHEN THIS PRODUCT
IS MIXED W/EPOXY RESINS; USE CARE WHEN MIXING LGE QTYS.

Waste Disposal Methods:KEEP OUT OF PUBLIC WATER SUPPLIES. INCINERATE IN
APPROVED FACILITY WHERE PERMITTED BY LOCAL, STATE & FEDERAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.